VEM Tooling designs and builds precision molds for automotive wiring harness brackets, the molded components that route and secure the vehicle's wiring harness along the body structure. Supporting OEMs and Tier 1/Tier 2 suppliers with tooling built for consistent fit and long-term retention.
Contact Sales
We build tooling for the molded brackets that route and retain the vehicle's wiring harness along its path through the body. These parts combine multiple retention points, snap-fit clip features, and mounting bosses in a single molded piece.
Long, contoured brackets that follow a defined path and hold the harness at multiple points.
Integrated clip features that secure the harness bundle without loose hardware.
Bolt and pin mounting points that anchor the bracket assembly to the body structure.
Snap-fit tooling that holds the harness securely without repeated flex fatigue.
Cavity geometry that follows the harness path precisely along its full length.
Cooling and wall-thickness strategy for long, contoured bracket sections.
Boss and rib tooling that keeps the bracket anchored under vibration load.
Tooling is designed around the flexibility, strength, and long-term clip retention each bracket component requires.
Design for manufacturability review of routing path, clip geometry, and wall sections.
Cavity layout, clip-forming tooling, and cooling design for long, contoured brackets.
Precision machining and fitting of mold components and clip-forming inserts.
Mold trial sampling with dimensional and first article inspection reporting.
Yes. We design tooling for brackets with several integrated snap-fit clip features along a single molded part, coordinating clip geometry across the mold set.
Most bracket tooling is built for PA66-GF, PA6, PBT, and PP, depending on the flexibility and structural requirements of the specific bracket.
Yes, we design cooling and cavity strategies specifically to control warpage across long, thin-wall bracket geometries that follow a defined routing path.
Our scope on this program is mold design and build. Production molding is typically run by the customer or their contracted molder.
We support mold trials, first article inspection, and optional CPK studies. Full PPAP submission is generally managed by the injection molder or production supplier.
Send us your part drawings or program details and we'll review tooling feasibility.
Contact Sales